Main Function
Agree to charge and discharge the battery pack
With constant current and constant voltage charging function
The charge and discharge protection of the battery can be checked whether it is normal or not through the charge and discharge cycle
Product Characteristics
♦ Fully meet the requirements of the battery pack charge and discharge outlets and charge and discharge outlets
♦ At the same time, aging positive plate can protect negative plate discharge protection
♦ By charging and discharge cycle of the battery, you can detect whether the charging protection and discharge protection of the battery are normal
♦ Charge and discharge cycle on the battery and record the charging capacity and discharge capacity
♦ The equipment has anti-reverse protection function. The device number is displayed through LED lamp, and the corresponding number can be inquired at any time
♦ The instrument provides P + and P- interfaces, and CH + and CH-, can test special finished batteries
♦ The equipment has a safe discharge current protection function
♦ PC computers can be connected through the serial port to reduce the complexity of instrument use
Product Parameters
| Input Power |
AC 380V 2KW 50Hz/60Hz |
| Voltage |
Measuring range |
10-100V |
| Precision |
±(0.2% of reading + 0.2% of range) |
| Electric Current |
Charging range |
2-20A |
| Charging accuracy |
±(0.2% of reading + 0.2% of range) |
| Discharge range |
0-40A |
| Precision |
±(0.2% of reading + 0.2% of range) |
| Charging |
Constant voltage cut-off current |
(minimum)10mA |
| Capacity |
Precision |
±1‰ |
| Power |
Discharge power |
4000W |
| Time |
Inspection time |
<2S(Receive real-time & LT; 2s) |
| Timing range |
0-999 hours/Step |
| Data recording interval |
≥5S |
| Median version |
1.1 series |
| Charging |
Charging mode |
Constant current and constant voltage charging |
| Cut-off condition |
Voltage, current, relative time, overcharge protection |
| Discharge |
Discharge mode |
Constant current discharge |
| Cut-off condition |
Voltage, relative time,over-discharge protection |
| Circulates |
Cyclic range |
1-999 |
| Single cycle number of steps |
100 |
| Voltage and current detection sampling |
Four wire connection |
| Noise |
<50dB |
| Database |
Using My SQL database to manage test data |
| Communication Mode of upper computer |
Based on TCP/IP Protocol, serial port |
| Data output mode |
EXCEL,TXT,Chart |
| Communication interface |
Mesh opening |
| Number of channels per cabinet |
Single Channel |
| Case size |
W*D*H:800MM*520MM*1370MM |
| Cabinet size |
W*D*H:700MM*400MM*420MM |
